1. Manuals
  2. Brands
  3. Crosswater Manuals
  4. Indoor Furnishing
  5. Tambour Vanity
  6. Manual

Crosswater Tambour Vanity Manual

Soft clay floor standing vanity unit with worktop
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

TAMBOUR
Furniture Range
i
IMPORTANT INFORMATION BEFORE YOU START
Please read carefully and keep this information for further reference.
Thank you for buying a Crosswater Product. To ensure that it
works to its full potential, it needs to be fitted correctly.
Check the contents of the pack carefully before installation.
Crosswater will not be held responsible for any de-fit/re-fit
costs where faulty product has been fitted. If any fault is
found with materials or workmanship, it must be reported
immediately to the manufacturer. Remedial action will be
taken, based on information received, on condition that:
1. Full details are supplied to the manufacturer.
2. The product has not been modified or tampered with;
1
3. The manufacturer is informed of any damage/shortages
prior to installation.
4. The product has not been installed, or attempts have been
made to install.
We do not accept responsibility for any problems that may
occur through incorrect installation. This product should
only be installed by a suitably qualified plumber/installer.
Should the installation be completed by a non-qualified
person any product guarantee maybe considered invalid. For
a claim made under our warranty, written certification of your
installer's qualifications may be required.
V10623

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tambour Vanity and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Crosswater Tambour Vanity

Summary of Contents for Crosswater Tambour Vanity

  • Page 1 IMPORTANT INFORMATION BEFORE YOU START Please read carefully and keep this information for further reference. Thank you for buying a Crosswater Product. To ensure that it 3. The manufacturer is informed of any damage/shortages works to its full potential, it needs to be fitted correctly.

  • Page 2: Before You Start

    BEFORE YOU START IMPORTANT INFORMATION Please read carefully and keep this information for further reference. Please check for any hidden pipes or electrical cables before drilling holes in the floor or walls. When using power tools always follow the manufacturer’s user instructions. This installation guide details fitting to a solid wall. If your bathroom has studded/ plasterboard walls, please use appropriate fixings.

  • Page 3: Installation

    INSTALLATION Determine the position and height of the unit, ensuring Measure the width and height of the fixing brackets - the recommended heights are followed. Ensure the distances B and C. Mark the wall and prepare to drill. measurements and markings you make are straight. Check Drill the marks using an 8mm drill bit, if using fixings that the plumbing connections from the wall are within the supplied, and ensuring there are no hidden pipes or cables in...
  • Page 4 INSTALLATION This is the correct way in which the legs should be fixed to the With the wall brackets firmly installed on the wall and level, floor of the furniture. the unit carcass can now be mounted on the wall brackets and adjusted to ensure it is flush with the wall and level The basin, tap and waste fittings may now be installed, With the wall brackets firmly installed on the wall and level,...
  • Page 5 INSTALLATION Click Return the drawers to the unit by extending the drawer Snap the hinge onto the front of the base and press on the guides and placing the drawer on the guides as shown on the back. diagram. Carefully push the drawer back into the unit until it engages audibly.

  • Page 6: Hinge Adjustment

    HINGE ADJUSTMENT Runner adjustment Turn the center screw to adjust the height door. Runner adjustment Turn the screw behind to adjust the door in depth. Runner adjustment Turn the front screw to adjust the door laterally.

  • Page 7: Care And Maintenance

    Do not use abrasive cleaners or bleach as this will permanently damage the lacquered surfaces. If any maintenance is required then it must be carried out by a qualified Plumber. For any further information please contact Crosswater on: 0345 873 8840 Or visit our web-site at: Part of the www.crosswater.co.uk...

Table of Contents