Crosswater Belgravia US-A11 Installation Instructions

Belgravia Frame Mirror
US-A11
Installation Instructions

Tools required:

Parts supplied:

A38
4x
A9,A11
2x

Cleaning Instructions

The safest cleaner for a mirror is a soft, clean cloth and warm water. If using a glass or mirror cleaner, be sure it does not contain
ammonia or vinegar.
Never spray any cleaner directly on to a mirror. Spray the cleaner on to a soft cloth and then wipe the mirror.
The mirror edges are treated with a specially formulated sealant designed to protect the mirror edges from contaminants and discoloring.
Care should always be taken to avoid getting the edges and backing of the mirror wet. Should they get wet, dry immediately.
Determine the final installation position, mark the fixing hole positions in pencil.
1
center of mirror
top of mirror
A38
4x
A9,A11
2x
2x
1 - 2
Ø8.0mm

IMPORTANT:

Please check this product immediately to ensure that it is complete
and check for damage that may have occurred during transport.
Note: Damage claims cannot be made during or after installation.
Please read these instructions carefully and keep for future reference
Using an 8mm drill bit, drill holes on the
2
marked positions. Note: In the event that the
wall fixings supplied are inappropriate for the
wall, please source alternatives.
B