Crosswater Optix 10 Installation Instructions Manual

Single inline panel screen

Hide thumbs Also See for Optix 10:

Download this manual

Optix 10 Single Inline Panel Screen

IMPORTANT

OXBDFC0900L

40Kgs

OXBDSC0900L

40Kgs

OXBDVC0900L

40Kgs

PH=6.8~7.2

PH<6.8 ; PH>7.2

Important Pre-Installation

Ensure the bath rim is as flat as possible,

this will assist in a smooth and water tight

moving door operation.

Optix 10 Single Inline Panel Screen

INSTALLATION INSTRUCTIONS

OXBDFC0900R

40Kgs

OXBDSC0900R

40Kgs

OXBDVC0900R

40Kgs

Need help?

Do you have a question about the Optix 10 and is the answer not in the manual?

Page 1 Optix 10 Single Inline Panel Screen IMPORTANT Important Pre-Installation Ensure the bath rim is as flat as possible, this will assist in a smooth and water tight moving door operation. OXBDFC0900L 40Kgs OXBDFC0900R 40Kgs OXBDSC0900L 40Kgs OXBDSC0900R 40Kgs OXBDVC0900L 40Kgs...
Page 2 Ensure that the product can be fixed to a solid masonry/brick wall or suitable timber stud work grade C16-C24 in the area behind the wall profile and wall brackets. These instructions have been prepared for your guidance, you must exercise due care at all times. The bath screen has left and right hand versions.
Page 3 Optix 10 Single Inline Panel Screen Bracing bar Allen key 4mm 3mm 2.5mm 2.5mm 1+1+1...
Page 4 Installation tools required, not supplied...
Page 6 Inside Inside 0-15mm...
Page 8 2.5mm Inside Hinged panel Hinged panel Fixed panel Fixed panel...
Page 10 V20220729...