How Do I Check The Health Of My Data Cartridge? (Non-Lto) - HP N1200 - StorageWorks Network Storage Router Faq

How do I check the health of my data cartridge? (Non-LTO)

1. Load the data cartridge into a drive of known good health.
2. Install and run L&TT
3. Select the device and click Test on the toolbar.
4. In the Test Execution tab, select the drive
5. Select the Media Validation test from Test Group.
6. Click Start Test. The test will read the whole tape so may take a long
time.
7. Open the Test Results tab to see the results of the test.