Remote Control - Aiwa NSX-A999 Operating Instructions Manual

IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no differences between the front speakers. Both
speakers can be connected as L (left) or R (right).
Check
your system and accessories
kE?k!wd
CX-NA999 Compact disc stereo cassette receiver
SX-WNA999 Front speakers
SX-R275 Surround speakers
Connect the right speaker to the main unit.
@
Connect the speaker cord with the plug to the SPEAKERS
HIGH FREQ R terminal.
1
2
Remote control AM antenna
FM antenna
@ Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R 0 terminal and the black cord
to the O terminal.
#
@
t)
Q@@
.,
."*'4
9
0
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
Connect the left speaker to the main unit.
Connect the speaker cord with plug to the SPEAKERS HIGH
FREQ L terminal, and another speaker cord to the
SPEAKERS LOW FREQ L terminals in the same manner as
step 1.
3
Surround speaker
4
3
Surround speaker
FM antenna
AM antenna
": 7
b
J
\
Surround
speaker
cord
1
Right speaker
2
Left speaker
I
3C
! J I
4
ENGLISH