Aiwa NSX-A999 Operating Instructions Manual page 18

Aiwa compact disc stereo system operating instructions model no. nsx-a999
Table of Contents

Advertisement

Available languages

Available languages

"RAN DAM/
REPEAT
0-9,+10
DISC
DIRECT
PLAY
DISC
[ '
~u
>'
CHANGE\-'"- ~
'—
- i--
)
.....
.
A OPEN/CLOSE
Press
CD,
then press A
OPEN/CLOSE
to
open the
disc compartment.
Load disc(s) wiith the label side
up.
To play one or two discs, place the discs cm tray 1 and 2,
To tdav three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
Tray 1
Tray number of the
disc to be played
Total playing time
Total number of tracks
Load discs.
To Dlav all discs in the disc com~artment,
press <~.
Play begins with the disc on tray 1.
Number of track being played
Elapsed playing time
To play one disc only, press DISC DIRECT F~LAY1-3,
The selected disc is played once,
To play with the remote control
Press DISC DIRECT PLAY, then press numbered buttons 11-3
within 3 seconds to select a disc.
To stop play, press 9.
To pause play, press 11. To resume play, press again.
To search for a particular point during playback, ket?p *H
or -
pressed and release it at the desired point.
To skip to the beginning of a track during plalyback, press
+4
or
> repeatedly or turn MULTI JOG.
To remove discs, press A OPEN/CLO$E.
To start play when the power is off (Direct Pli~y Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened,
To check the remaining time
During play, press CD EDIT/CHECK,
The amount c)f time
remaining until all tracks finish playing is displayf?d. To restore
the playing time display, repeat the abow?.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY, then press numbered buttons 1-
3 within 3 seconds to select a disc.
Press numbered buttons O-9 and
+10
to select a track.
Example:
To select the 25th track, press +10, +110and 5.
To select the 10th track, press +10 and O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs
3 Press A OPEN/CLOSE to close the dlisc compartment.
When loading an 8-cm (3-inch) disc, put it onto thle inner circle
of the tray.
* Do not place more than one compact disc on om? disc tray.
Do not tilt the unit with discs loaded,
Doing so may cause
malfunctions.
o
Do not use irregular
shalpe
CDs (example: h(?art-shaped,
octagonal ones), It may result in malfunctions.
18
ENGLISH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents