Related Manuals for Dulytek DE10K
Summary of Contents for Dulytek DE10K
- Page 1 HEAT PRESS MODEL No: DE10K INSTRUCTION MANUAL CONTACT Dulytek Equipment help@dulytek.com © 2019 Dulytek All rights reserved Seatle, WA 98105 www.dulytek.com...
- Page 2 UNPACKING Unpacking Precautions Unpacking Instructions Item Checklist Recommended Parts PAGE 6 GETTING FAMILIAR DE10K Press Features and Controls: Front Side DE10K Press Features and Controls: Back Side PAGE 7 OPERATING INSTRUCTIONS Preparing and Starting Press Setting Temperature Heating and Pressing...
-
Page 3: Copyright Notice
INSTRUCTION MANUAL: DE10K PAGE 2 INTRODUCTION DULYTEK DE10K hybrid heat press is a machine engineered and manufactured for solvent-less plant rosin oil extraction for further use in research laboratories, pharmaceutical, cosmetic, food processing, and brewing industries. READ BEFORE To avoid accidents, first read SAFETY PRECAUTIONS (PAGE 2) and OPERATING HANDLING PRECAUTIONS (PAGE 4). - Page 4 INSTRUCTION MANUAL: DE10K PAGE 3 SAFETY PRECAUTIONS (continued) WARNING: Follow the warnings below. Otherwise, death or serious injuries may occur. • Use this product only as described in this manual. • Keep the equipment out of the reach of children at all times.
-
Page 5: Handling Precautions
• DO NOT exceed the rated capacity. • Contact DULYTEK at help@dulytek.com if the equipment does not start or if smoke or unusual odors are detected. • Always turn the machine OFF and unplug it when done using. UNPACKING... -
Page 6: Unpacking Instructions
DULYTEK at help@dulytek.com immediately. ITEM Before starting, please make sure that the following items are included with CHECKLIST your press machine. If anything is missing, contact DULYTEK. 1. DULYTEK DE10K Heat Press; 2. AC Power Cord; 3. Instruction Manual. -
Page 7: Getting Familiar
INSTRUCTION MANUAL: DE10K PAGE 6 GETTING FAMILIAR DE10K PRESS FEATURES AND CONTROLS: FRONT SIDE Pressure Meter Up Button Down Button Power Button Temperature Control Panel Safety Sensor Top Platen Bottom Platen Safety Sensor © 2019 Dulytek Dulytek Equipment All rights reserved www.dulytek.com... - Page 8 INSTRUCTION MANUAL: DE10K PAGE 7 GETTING FAMILIAR (continued) DE10K PRESS FEATURES AND CONTROLS: BACK SIDE Circuit Breakers AC Power Cord Socket OPERATING INSTRUCTIONS PREPARING 1. Prepare materials you wish to press. See ROSIN PRESSING TIPS (PAGE AND STARTING 10). PRESS 2. Make sure the press stands on a flat sturdy countertop. 3. Ensure the press is clean and free of residue or dust buildup.
-
Page 9: Setting Temperature
INSTRUCTION MANUAL: DE10K PAGE 8 OPERATING INSTRUCTIONS (continued) SETTING The temperature settings are measured in Fahrenheit degrees. The same TEMPERATURE temperature is used when heating up both top and bottom platens. The numbers shown on Upper Temp and Bottom Temp lines of the control panel .. - Page 10 INSTRUCTION MANUAL: DE10K PAGE 9 OPERATING INSTRUCTIONS (continued) SETTING 6. Press Left arrow button one more time (Fig. 7) to move to the ones place. TEMPERATURE The ones place digit is now flashing (shown as the last “2” on the right in (continued) the Fig. 7). 7. Press Up arrow button to select a desired ones place digit (Fig. 8). 8. Hit SET button again to record the setting (Fig. 9). The SET indicator turns off. Fig. 7 Fig. 8 Fig. 9 HEATING AND 1. Press HOT button (Fig. 10) on the control panel to start heating both PRESSING platens. The HOT indicator lights up (Fig. 11). Tip: You can stop heating the plates at any time by pressing HOT button again.
- Page 11 INSTRUCTION MANUAL: DE10K PAGE 10 OPERATING INSTRUCTIONS (continued) heavier will. HEATING AND 4. Press and hold Down button until the machine lowers its top platen PRESSING and the pressure shown on the live pressure meter is starting to rise. (continued) Tip: The DOWN indicator on the control panel lights up when the plate is moving down.
-
Page 12: Filter Bags
INSTRUCTION MANUAL: DE10K PAGE 11 ROSIN PRESSING TIPS (continued) PLANT Maintain your plant relative humidity at around 62%. Store your herbs in an MATERIAL airtight containers with two-way humidity packs in a dark place. Allow at least (continued) 48 hours for the material to reach the optimal humidity level. Open the jars one or two times per day to air them for a few minutes before re-sealing. - Page 13 BUDDER texture is achieved. Whipped rosin, also known as “budder”, is more malleable and easier to manage. MORE Please see our website and subscribe to our newsletter and Dulytek social INFORMATION media pages for more tips, innovations, industry news, and promotional discounts. Dulytek Equipment ©...
-
Page 14: Technical Specifications
INSTRUCTION MANUAL: DE10K PAGE 13 TECHNICAL SPECIFICATIONS PARAMETER SPECIFICATIONS Model DE10K Press Force 10000 lb / 5 Ton Power 880 W Current Voltage 110 V Frequency 50 Hz Dual Heating Plates Platen Size 3 x 5 inch / 76 x 127 mm Temperature Range up to 356 °F / 180 °C...
Need help?
Do you have a question about the DE10K and is the answer not in the manual?
Questions and answers