TP-Link TL-MC101 Manual

Enlarge Your Ethernet Network
Gigabit Ethernet Media Converter
TL-MC101/TL-MC102/TL-MC200
Package Contents: Media Converter, Power Adapter, User Guide
Note: TL-MC102 is used as an example throughout this guide. Other models may differ in appearance.
Scenario 1: Connect Devices with and without Optical Interfaces
Ethernet device
with optical interfaces
Note: It is recommended to use a TP-Link SFP module on TL-MC200, because other vendors' modules may be incompatible.
Scenario 2: Connect Devices without Optical Interfaces
Ethernet device
without optical interfaces
Note:
1. Either two TL-MC101 converters or two TL-MC102 converters can work cooperatively. Two TL-MC200 converters with a pair of SFP module can work cooperatively.
2. One TL-MC200 can also cooperate with one TL-MC101 or one TL-MC102. However, the mode and wavelength of the SFP module used in TL-MC200 must be the same as the opposite end.
3. Connect the TX port of one converter to the RX port of the other using a fiber cable.
1000BASE-X interface
LC-SC Fiber Cable
Media Converter
Gigabit Ethernet interface
Twisted-Pair Cable
https://www.tp-link.com/support/?type=smb, or simply scan the QR code.
Media Converter
Gigabit Ethernet interface
Media Converter
Fiber Cable
For technical support and other information, please visit
Ethernet device
without optical interfaces
Twisted-Pair Cable
Ethernet device
without optical interfaces
Gigabit Ethernet interface
Twisted-Pair Cable
© 2024 TP-Link 7106511317 REV1.0.0