Advertisement
User Manual OPC UA Server / DeviceNet Slave
Document code: MN67B36_ENG
Revision 1.000
Page 11 of 24
Industrial Electronic Devices
ETHERNET:
Ethernet connection must be made using Connector3 of HD67B36-B2 with at least a Category 5E cable. The maximum length of the cable
should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the device
to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a cross
cable.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Need help?
Do you have a question about the HD67B36-B2 and is the answer not in the manual?
Questions and answers