Garmin G1000:Socata Pilot's Manual page 32

SYSTEM OVERVIEW
STBY
ON
ALT
GND
VFR
CODE
IDENT
TMR/REF
NRST
MSG
1-22
Selects standby mode (transponder does not reply to any
interrogations)
Selects Mode A (transponder replies to interrogations)
Selects Mode C – altitude reporting mode (transponder replies to
identification and altitude interrogations)
Manually selects Ground Mode, the transponder does not allow
Mode A and Mode C replies, but it does permit acquisition squit-
ter and replies to discretely addressed Mode S interrogations
Automatically enters the VFR code (1200 in the U.S.A. only)
Displays transponder code selection softkeys 0-7
0 — 7 Use numbers to enter code
BKSP Removes numbers entered, one at a time
Activates the Special Position Identification (SPI) pulse for 18
seconds, identifying the transponder return on the ATC screen
Displays Timer/References Window
Displays Nearest Airports Window
Displays Messages Window
Figure 1-16 Top Level PFD Softkeys
Figure 1-17 INSET Softkeys
Garmin G1000 Pilot's Guide for the Socata TBM 850
STRMSCP
Select the BACK Softkey
to return to the top-level softkeys.
190-00709-00 Rev. A