Garmin G1000:Socata Pilot's Manual page 428

AUTOMATIC FLIGHT CONTROL SYSTEM
Flying a RNAV GPS approach with vertical guidance:
1) Arm flight director modes for a RNAV GPS approach with vertical guidance:
a) Make sure the navigation source is set to GPS (use CDI Softkey to change navigation source).
b) Select the Runway 35R LPV approach for KCOS. Load and activate the approach into the flight plan.
2) Press the APR Key once clearance for approach has been received. GPS Approach Mode is activated and
Glidepath Mode is armed.
3) Once the glidepath is captured, Glidepath Mode becomes active. The flight director now provides guidance to
the missed approach point.
4) There are two options available at this point, as the autopilot flies the approach:
• Push the AP DISC Switch at the decision
height and land the aircraft.
7-44
KCOS
4
CEGIX
3
2
FALUR
PYNON
Figure 7-44 LPV Approach to KCOS
Garmin G1000 Pilot's Guide for the Socata TBM 850
• Use the GA Switch to execute a missed approach.
HABUK
1
190-00709-00 Rev. A