Garmin G1000:Socata Pilot's Manual page 31

SENSOR
ADC1
ADC2
AHRS1
AHRS2
PFD
DFLTS
WIND
DME
BRG1
HSI FRMT
BRG2
ALT UNIT
STD
BARO
OBS
CDI
ADF/DME
XPDR
XPDR1
XPDR2
190-00709-00 Rev. A
Displays softkeys for selecting the #1 and #2 AHRS and Air Data
Computers
Selects the #1 Air Data Computer
Selects the #2 Air Data Computer
Selects the #1 AHRS
Selects the #2 AHRS
Displays second-level softkeys for additional PFD configurations
Resets PFD to default settings, including changing units to stan-
dard
Displays softkeys to select wind data parameters
OPTN 1 Wind direction arrows with headwind and crosswind components
OPTN 2 Wind direction arrow and speed
OPTN 3 Wind direction arrow with direction and speed
OFF Information not displayed
Displays the DME information window
Cycles the Bearing 1 Information Window through NAV1, GPS/
waypoint identifier and GPS-derived distance information, and
ADF/frequency.
Provides access to the HSI formatting softkeys
360 HSI Displays the HSI in a 360 degree view
ARC HSI Displays the HSI as an arc
Cycles the Bearing 2 Information Window through NAV2 or GPS
waypoint identifier and GPS-derived distance information, and
ADF/frequency.
Displays softkeys for setting the altimeter and BARO settings to
metric units
METERS When enabled, displays altimeter in meters
IN Select to display the BARO setting as inches of mercury
HPA Select to display the BARO setting as hectopacals
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units
are selected)
Selects OBS mode on the CDI when navigating by GPS (only
available with active leg)
Cycles through GPS, VOR1, and VOR2 navigation modes on the
CDI
Displays the ADF/DME Tuning Window, allowing tuning of the
ADF , ADF Mode selection, ADF volume control, and selection of
the DME
Displays transponder mode selection softkeys
Selects the #1 transponder as active
Selects the #2 transponder as active
Garmin G1000 Pilot's Guide for the Socata TBM 850
SYSTEM OVERVIEW
1-21