1. Manuals
  2. Brands
  3. Standard Pump Manuals
  4. Water Pump
  5. SP-B2 Series
  6. Operating instructions and parts manual

Standard Pump SP-B2 Series Operating Instructions And Parts Manual

Industrial pump tube, industrial pump motor, pump package
Hide thumbs

Advertisement

Table of Contents

Operating Instructions and Parts Manual
Industrial Pump Tube Models:
SP-PP, SP-CPVC, SP-PVDF,
SP-6600/6700 & SP-7600/7700
Series
Industrial Pump Motor Models:
SP-280P, SP-ENC, SP-A1, SP-B2
& SP-400 Series
Pump Package Models:
9400, 9420, 9430, 9500, 9510,
9710, 9760, 9900 & 9920 Series
Standard Pump Europe
Ronnekrogen 2, DK-3400 Hillerod, Denmark
Phone +45 7023 2100
info@standard-europe.eu
www .standard-europe.eu

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-B2 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Standard Pump SP-B2 Series

Summary of Contents for Standard Pump SP-B2 Series

  • Page 1 Industrial Pump Motor Models: SP-280P, SP-ENC, SP-A1, SP-B2 & SP-400 Series Pump Package Models: 9400, 9420, 9430, 9500, 9510, 9710, 9760, 9900 & 9920 Series Standard Pump Europe Ronnekrogen 2, DK-3400 Hillerod, Denmark Phone +45 7023 2100 info@standard-europe.eu www .standard-europe.eu...
  • Page 2 Drum Pump Tubes and Pump Packages ..............Operation & Maintenance ..................Pump Tube Spare Parts ..............................Hazardous Duty / AtEx......................Declarations of Conformity..................... Atex Declaration ......................Standard Pump Europe Ronnekrogen 2, DK-3400 Hillerod, Denmark Phone +45 7023 2100 info@standard-europe.eu www .standard-europe.eu...
  • Page 3 Operating Instructions and Parts Manual (OIPM-IND-ISS4) All Federal, State, and local safety codes WARNING: The speed control Description should be followed. should not be used as the main ON/OFF Unibloc Hygienic Technologies Drum Pumps are switch. Using the speed control switch in Verify that the motor voltage designed to transfer a variety of materials from corresponds to proper electrical supply.
  • Page 4 Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-280P Series Spare Parts List Ref # Description 8130P Screw, Motor Cover/Lower Housing 8000 Motor Cover Wave Washer 8125 8331 Bearing, Upper 8508 Brush Holder 8509* Carbon Brush, 110V/220V Stator 8503 110V 8702 220V 8448 Hexagon Nut Lock Washer...
  • Page 5 Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-ENC Series Spare Parts List Ref # Description 3130 Screw, Motor Cover 3000 Motor Cover 3512 3511 Bearing Cover 8125 Wave Washer Bearing, Upper 8331 8508 Brush Holder 8509* Carbon Brush, 110V/220V Stator 3503 110V 3702 220V...

  • Page 6: Operation

    Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-B2 Series Spare Parts List Description: The SP-B2P air motor is equipped with a plate which permanently locks the trigger in the "ON" position. The speed of the motor can be adjusted by turning the speed regulator on the side of the motor handle between the "OFF"...
  • Page 7 Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-A1 Spare Parts Lists Ref. # Description Repair Kit* (Includes items 2,4,6,7 & 11 SK285 Dead End Cap SAC228A Gasket SAC229 Dowel Pin SD324A Bearing SAG549 Dead End Plate SAC617 Gasket SAC527 Vane SAE893 Rotor Assembly SAE896 Body...
  • Page 8 Operating Instructions and Parts Manual (OIPM-IND-ISS4) Pump Package Speci cations Electric Motor Pump Packages Immersion Nozzle Model Voltage Phase Meter Wetted Components Hose Length Length Material 9400 110V Polypropylene, Carbon, Hastelloy C, PVC, Viton , PTFE 39" (1000 mm) 6 ft. (1,83 meters) Polypropylene ®...

  • Page 9: Maintenance

    3. Couple the motor to the pump tube by using the Hand Wheel. (See figure 1). Pump Foot Figure 1 When using an SP-A1 or SP-B2 Series motor, Unibloc Hygienic Technologies recommends the use of a Filter Lubricator Regulator (FLR) in order to Figure 3 ensure a moisture free supply of air to the Motor.
  • Page 10 Operating Instructions and Parts Manual (OIPM-IND-ISS4) 5. Remove the Pump Housing (see Figure 5). Figure 7 8. Remove pump coupling (P/N: 1004) from drive shaft by turning counterclockwise (see Figure 8). NOTE: Use grip-lock pliers to hold shaft while removing coupling. Figure 5 NOTE: Remove pump housing by turning clockwise.
  • Page 11 Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-PP, SP-CPVC, SP-PVDF Series Spare Parts List Ref. P/N for P/N for P/N for Description Number SP-PP SP-CPVC SP-PVDF Hand Wheel, Polypropylene 1842 1842 1842 Pump Coupling, Nylon 1004* 1004* 1004* Snap Ring, Steel 1508 1508 1508...
  • Page 12 Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-6600 & 6700 Spare Parts List Ref. Description Number 1842 Handwheel, Polypropylene 1508 Snap Ring, Steel *1004 Pump Coupling, Nylon *1038-2 Bearing, Viton Shielded Bearing Spacer, SS316L *8838-4 V Seal, PTFE 4000 6650 Connection Flange, AL 6061 Drive Shaft, SS316L 27"...
  • Page 13 Operating Instructions and Parts Manual (OIPM-IND-ISS4) SP-7600 & 7700 Spare Parts List Ref. Description Number 1842 Hand Wheel, PP 1508 Snap Ring, Steel Pump Coupling, Nylon *1004 Bearing, Viton Shielded *1038-2 Bearing Spacer, SS316L *8838-4 4000 Secondary Seal, PTFE 8602 Connection Flange, SS316L Guide Sleeve 27", 39", 47"...

  • Page 14: Operation And Safety Guidelines

    Hazardous Atmospheres before and after pump start. the motor. SP-A1 Series & SP-B2 Series The pumps must not be exposed to pumping SP-A1 and SP-B2 hard solid particles which can create sparks. At the present time, there are no known...
  • Page 15 Operating Instructions and Parts Manual (OIPM-IND-ISS4) Grounding Procedures Bonding and grounding are required when before starting). Always check with a safety pumping flammable materials or in hazardous engineer when any question arises and Transferring of duty environments. Failure to bond and periodically check safety procedures with a flammables or use in ground properly can cause a discharge of...
  • Page 16 Operating Instructions and Parts Manual (OIPM-IND-ISS4) North America Declaration of Conformity We here with declare that the construction type Designation: SP-280P SP-280P-V SP-ENC SP-ENC-V Machine type: Electric Motors for drum pumps Item No: SP-280P SP-280P-V SP-ENC SP-ENC-V In the form as delivered by us complies with following applicable regulations: Conforms to UL STD 1004-1 Certified to CSA STD C22.2 No.

  • Page 17: Ec Declaration Of Conformity

    Operating Instructions and Parts Manual (OIPM-IND-ISS4) EC Declaration of Conformity We herewith declare that the construction type Designation: SP-280P-2 SP-280P-2-NL SP-280P-2-V SP-280P-2-V-NL SP-ENC-2 SP-ENC-2-NL SP-ENC-2-V SP-ENC-2-V-NL Machine type: Electric Motors for drum pumps Item No: SP-280P-2 SP-280P-2-NL SP-280P-2-V SP-280P-2-V-NL SP-ENC-2 SP-ENC-2-NL SP-ENC-2-V SP-ENC-2-V-NL...
  • Page 18 Standard Pump Operating Instructions and Parts Manual (OIPM-IND-ISS4)

  • Page 19: Warranty

    Operating Instructions and Parts Manual (OIPM-IND-ISS4) WARRANTY Three year limited warranty Unibloc Hygienic Technologies warrants, subject to the conditions below, through either Unibloc Hygienic Technologies, it’s subsidiaries, or its authorized distributors, to repair or replace free of charge, including labor, any part of this equipment which fails within three years of delivery of the product to the end user .

This manual is also suitable for:

Sp-cpvc seriesSp-pvdf seriesSp-6600 seriesSp-6700 seriesSp-7600 seriesSp-7700 series ... Show all

Table of Contents