Summit X450 Series Switches; Summit X450-24T Switch - Extreme Networks Summit X250e-24t Hardware Installation Manual

Summit X450 Series Switches

The Summit X450 series switches are 24-port switches without PoE options. The ports are implemented
as fixed 10/100/1000BASE-t RJ-45 ports or as installable SFP modules. These switches are available only
with AC internal power supplies.
The Summit X450 series of switches consists of the following switches:

Summit X450-24t Switch

●
Summit X450-24x Switch
●
Summit X450-24t Switch
The front panel of the Summit X450-24t switch
Twenty fixed autosensing 10/100/1000 BASE-T ports (ports 5-24) that provide 20 Gbps of
●
high-density copper connectivity
Four combination ports (ports 1-4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or
●
fiber connectivity
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 27: Summit X450-24t Switch Front Panel
Mini-GBIC ports
Band On = Link
Blinking = Activity
STACK NO.
Stack number
indicator
Combination ports
The rear panel of the Summit X450-24t switch
Slot for the Summit XGM-2xn option card, which allows you to add one or two 10-Gigabit XENPAK
●
modules
For information about the Summit XGM-2xn option card, see
page 148.
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Summit Family Switches Hardware Installation Guide
(Figure
57.
10/100/1000 Mbps ports
Shared Ports
(Figure
27) includes:
"Summit X450, X450a, and X450e Series
Console
port
S450_002D
28) includes:
"Summit XGM-2xn Option Card" on
41