Summit X250E Series Switch Leds - Extreme Networks Summit X250e-24t Hardware Installation Manual

Summit Family Switches

Summit X250e Series Switch LEDs

Table 8 describes the LEDs on the Summit X250e switches.
Table 8: LEDs on the Summit X250e Series Switches
Label or Type
Front Panel
MGMT
FAN
PSU-I
(Internal power
supply)
PSU-E
(External power
supply)
Port number
1 – 24 or 1 –
48
Port number
25, 26 or 49,
50
(Shared ports)
Stack 1,2
Stack Number
Indicator
34
Color/State
Blinking green (fast)
Steady green
Blinking green (slow)
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking green
Off
Steady green
Blinking green
Off
Steady green
Blinking green
Top half of number
blinking
Lower half of number
blinking
Number lights steadily
Meaning
Power-on self-test (POST) in progress
POST passed. System is booting image.
Normal operation.
Switch diagnostics are running.
or
System is disabled. POST failed or system overheated.
No external power attached
Normal operation
Fan failure. Switch will continue to operate unless it overheats.
No power
Normal operation
Failure
No power
Normal operation
Failure
No external power attached
Link is OK.
Port is transmitting packets.
Link is not present, or port is disabled.
Link is OK
Port is transmitting packets.
Link is not present, or port is disabled.
Link OK on the indicated stack port.
Activity on the indicated stack port.
This switch is the stack master.
This switch is the stack backup.
This switch is a standby switch (neither the master nor the
backup).
Summit Family Switches Hardware Installation Guide