Setting For The Clients - Epson C11CF39402A0 User Manual

Windows XP/Windows Server 2003 R2/Windows Server 2003
1. Click Start, and then click Control Panel.
2. Click Security Center.
3. Click Windows Firewall to open the Windows Firewall window.
4. Make sure that Don't allow exceptions is not selected from the General tab.
5. Open the Exceptions tab, select File and Printer Sharing, and then click OK.

Setting for the clients

This section describes how to install the printer driver by accessing the shared printer on a network.
Note:
❏ To share the printer on a Windows network, you need to set the printer server. For details, see
"Setting up your printer as a shared printer" on page 76.
❏ This section describes how to access the shared printer on a standard network system using the server
(Microsoft workgroup). If you cannot access the shared printer due to the network system, ask the
administrator of the network for assistance.
❏ This section describes how to install the printer driver by accessing the shared printer from the
Printers folder. You can also access the shared printer from Network Neighborhood or My Network
on the Windows desktop.
❏ When you want to use the EPSON Status Monitor 3 at clients, you have to install both of the printer
driver and the EPSON Status Monitor 3 in each client.
❏ If the printer drivers are not already installed on the client, please install them before performing
these settings.
1. Right-click the Start menu, click Control Panel, then click View devices and printers.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User's Guide
Printer Software 80