Troubleshooting; Using Leds To Diagnose Problems; Power Led; Lan Led - Encore ENDSL-A2+R2 User Manual

[ADSL]
The ADSL screen gives you information about how much data your router has transmitted or
received across the ADSL connection. Click on REFRESH to update the screen.

5. Troubleshooting

If the router is not function properly, first check this session for simple troubleshooting before
contacting your Internet service provider (ISP) for support.

5.1 Using LEDs to Diagnose Problems

The LEDs are useful aides for finding possible problem causes.

5.1.1 Power LED

The PWR LED on the front panel does not light up.
STEPS
1 Make sure that the power adaptor is connected to the router and plugged in to an
appropriate power source. Use only the supplied power adaptor.
2 Check that the router and the power source are both turned on and the router is
receiving sufficient power.
3 Turn the router off and on.
4 If the error persists, you may have a hardware problem. In this case, you should contact
your vendor.

5.1.2 LAN LED

The LAN LED on the front panel does not light up.
STEPS
1 Check the Ethernet cable connections between your router and the computer or hub.
2 Check for faulty Ethernet cables.
3 Make sure your computer's Ethernet card is working properly.
4 If these steps fail to correct the problem, contact your local distributor for assistance.
CORRECTIVE ACTION
CORRECTIVE ACTION
75