Table of Contents
Advertisement
Configure IP Automatically:
Step 4:
Select Obtain an IP address automatically and Obtain DNS server address
automatically then click OK to complete IP configuring process.
Configure IP Manually:
Step 4:
Select Use the following IP address and Use the following DNS server
addresses.
IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254).
Subnet mask: Default value is 255.255.255.0.
Default gateway: Default value is 192.168.1.1.
Preferred DNS server: Fill in preferred DNS server IP address.
Alternate DNS server: Fill in alternate DNS server IP address.
24
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ENDSL-A2+R2 and is the answer not in the manual?
Questions and answers