Firmware - Encore ENDSL-A2+R2 User Manual

Current Date/Time: This field displays an updated Date and Time when you reenter this
menu.
[Time Synchronization]
Synchronize time with: You can choose "NTP Server automatically", "PC's Clock", or
"Manually" to coordinate the time.
Time Zone: Choose the Time Zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Daylight Saving: Choose "Enabled" or "Disabled" to use daylight savings time.
NTP Server Address: Type the IP address or domain name of your timeserver. Check with
your ISP/network administrator if you are unsure of this information.
4.6.3

Firmware

You can upgrade the firmware of the router in this page. Make sure the firmware you want
to use is on the local hard drive of the computer. Click on Browse to browse the local had drive
and locate the firmware to be used for the update. Then press UPGRADE to upload new
Firmware. It might take several minutes, don't power off it during upgrading. Device will
restart after the upgrade!!
After a success upload, the system automatically restarts. Please wait for the device to
finish restarting. This should take about 2 minutes or more. You need to log in again if you want
to access the device.
68