Access Management; Acl - Encore ENDSL-A2+R2 User Manual

Adsl2+ modem one port full-rated router

Hide thumbs Also See for ENDSL-A2+R2:

Table of Contents

4.5 Access Management

Go to Access Management

ACL to enable remote management. You may use telnet or

Web to remotely manage the ENDSL-A2+4R2. User just needs to enable Telnet or Web and

give it an IP address that wants to access the ENDSL-A2+4R2. The default IP 0.0.0.0 allows

any client to use this service to remotely manage the ENDSL-A2+4R2.

ACL: There has Activated & Deactivated option. The default setting is Deactivated which

means all IP can access via router. If you choose Activated, you only can access via router by

listed IP addresses.

ACL Rule Index: Index number from 1 and up to 16.

Active: Once you choose Yes then you can access the IP via router.

Application: Each of these labels denotes a service that you may use to remotely manage the

Router. Choices are Web, FTP, Telnet, SNMP, Ping, ALL.

Interface: Select the access interface. Choices are WAN, LAN and Both.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the ENDSL-A2+R2 and is the answer not in the manual?

Endsl-a2+4r2