Bypassing Unused Input Selections; Selecting The Transmission Speed (Rs-232C) - Eiki EIP-4500 Owner's Manual

Helpful Functions Set during Installation ("Options (2)" menu)
Bypassing Unused Input
Selections
This function allows you to skip the input mode
that you rarely use. You can skip the input modes
when pressing INPUT 1, 2, 3 button or INPUT 4, 5
button on the projector.
Menu operation
Example: "Options (2)" screen menu
Description of Set Inputs
Selectable items
Sets the INPUT 1—5 mode select-
ON
able respectively.
INPUT 1—5
Sets the INPUT 1—5 mode unavail-
OFF
able respectively.
86
Page 58
Description
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation Page 58
Example: "Options (2)" screen menu
Description of RS-232C
Selectable items
9600 bps
Transmission speed is slow.
38400 bps
115200 bps Transmission speed is rapid.
Note
• Refer to the "SETUP GUIDE" contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
• Refer to the computer owner's manual for
instructions for setting the computer's baud rate.
Description