Reversing/Inverting Projected Images; Controlling Multiple Projectors With The One Remote Control - Eiki EIP-4500 Owner's Manual

Helpful Functions Set during Installation ("Options (2)" menu)
Reversing/Inverting Pro-
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation
Example: "Options (2)" screen menu
Description of PRJ Modes
Selectable items
Front
Normal image
Ceiling + Front Inverted image
Rear Reversed image
Ceiling + Rear Reversed and inverted image
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page 23.)
84
Page 58
Description
Controlling Multiple Projectors
with the One Remote Control
This function allows you to control multiple pro-
jectors with the one remote control during the
stack projection or the video wall projection.
When using this function, connect the projectors
with LAN cables and assign a projector as the
master and the other projectors as the slaves.
page 35 for connecting LAN cables.
Menu operation Page 58
Example: "Options (2)" screen menu
Description of Stack Setting
Selectable items
Normal
The stack setting is not available.
Master
Set the projector as the master.
Slave Set the projector as the slave.
Note
• When controlling multiple projectors with the one
remote control, settings via web browser are
required. Refer to the "SETUP GUIDE" con-
tained on the supplied CD-ROM for details.
• Only when controlling two projectors with the
one remote control, using "Pair Stack" allows
you to skip settings via web browser. (See page
85.)
• When "Slave" is selected on "Stack Setting", the
slave projector cannot be controlled with the
remote control.
To control the slave projector with the remote
control, connect the remote control to the pro-
jector. (See page 18.)
See
Description