Reversing/Inverting Projected Images; Selecting The Transmission Speed (Rs-232C) - Eiki EIP-3500 Owner's Manual

Reversing/Inverting Pro-
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation Page 42
Example: "Options2" screen menu
Description of PRJ Modes
Selectable items
Front Normal image
Ceiling + Front Inverted image
Rear Reversed image
Ceiling + Rear Reversed and inverted image
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page 20.)
Description
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation Page 42
Example: "Options2" screen menu
Description of RS-232C
Selectable items
Transmission speed is slow.
9600 bps
115200 bps
Transmission speed is rapid.
Note
• Refer to the "SETUP GUIDE" contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
• Refer to the computer's operation manual for
instructions for setting the computer's baud rate.
Description
59