Connect Interface Ports; Connect A Fiber-Optic Port To The Network; Disconnect Optical Ports From The Network; Connecting A Cable To The Gnss Antenna Interface - Cisco NCS 5500 Series Manual

Connect router to the network
Hide thumbs Also See for NCS 5500 Series:
Table of Contents

Advertisement

Connect Router to the Network
Step 4
Grasp the CFP2 module between your thumb and index finger and carefully remove it from the port.
Step 5
Place the removed CFP2 module on an antistatic mat, or immediately place it in a static shielding bag if you plan to return
it to the factory.

Connect Interface Ports

You can connect optical interface ports on line cards with other devices for network connectivity.

Connect a Fiber-Optic Port to the Network

Depending on the line card model that you are using, you can use either QSFP+ or QSFP28 transceivers.
Some transceivers work with fiber-optic cables that you attach to the transceivers and other transceivers work
with pre-attached copper cables. When installing fiber-optic cables for a port, you must install SFP transceivers
for 1-Gigabit optical ports or install SFP+ transceivers for 10-Gigabit optical ports or QSFP+ transceivers for
100-Gigabit ports before installing the fiber-optic cable in the transceivers.
Caution
Removing and installing a transceiver can shorten its useful life. Do not remove and insert transceivers any
more than is absolutely necessary. We recommended that you disconnect cables before installing or removing
transceivers to prevent damage to the cable or transceiver.

Disconnect Optical Ports from the Network

When you need to remove fiber-optic transceivers, you must first remove the fiber-optic cables from the
transceiver before you remove the transceiver from the port.

Connecting a Cable to the GNSS Antenna Interface

Step 1
Connect one end of a shielded coaxial cable to the GNSS RF IN port.
Step 2
Connect the other end of the shielded coaxial cable to the GNSS antenna after the primary protector.
The GNSS RF In port should have a primary protector installed to meet the Local Safety guidelines.
Note
Connect Interface Ports
Connect Router to the Network
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents