Entering Port-Profile Configuration Mode And Modifying A Port Profile - Cisco 7604-RSP720C-R Configuration Manual

Configuring the Basic Interface Parameters
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
DETAILED STEPS
Command
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
port-profile [type {ethernet | interface-vlan |
loopback | port channel | tunnel}] name
Example:
switch(config)# port-profile type tunnel test
switch(config-ppm)#
Step 3
exit
Example:
switch(config-ppm)# exit
switch(config)#
Step 4
show port-profile
Example:
switch(config)# show port-profile
Step 5
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to create a port profile named test for tunnel interfaces:
switch# configure terminal
switch(config)# port-profile type tunnel test
switch(config-ppm)#

Entering Port-Profile Configuration Mode and Modifying a Port Profile

You can enter the port-profile configuration mode and modify a port profile. To modify the port profile,
you must be in the port-profile configuration mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
2-44
configure terminal
port-profile [type {ethernet | interface-vlan | loopback | port channel | tunnel}] name
exit
show port-profile
copy running-config startup-config
Chapter 2 Configuring Basic Interface Parameters
Purpose
Enters configuration mode.
Creates and names a port profile for the
specified type of interface and enters the
port-profile configuration mode.
Exits the port-profile configuration mode.
(Optional) Displays the port-profile
configuration.
(Optional) Copies the running
configuration to the startup configuration.
OL-23435-03