Inheriting A Port Profile - Cisco 7604-RSP720C-R Configuration Manual

Chapter 2 Configuring Basic Interface Parameters
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
port-profile [type {ethernet | interface-vlan |
loopback | port channel | tunnel}] name
Example:
switch(config)# port-profile type tunnel test
switch(config-ppm)# no shutdown
switch(config-ppm)#
Step 3
state enabled
Example:
switch(config-ppm)# state enabled
switch(config)#
Step 4
exit
Example:
switch(config-ppm)# exit
switch(config)#
Step 5
show port-profile
Example:
switch(config)# show port-profile
Step 6
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to enter the port-profile configuration mode and enable the port profile:
switch# configure terminal
switch(config)# port-profile type tunnel test
switch(config-ppm)# state enabled
switch(config-ppm)#

Inheriting a Port Profile

You can inherit a port profile onto an existing port profile. The system supports four levels of inheritance.
OL-23435-03
configure terminal
port-profile [type {ethernet | interface-vlan | loopback | port channel | tunnel}] name
state enabled
exit
show port-profile
copy running-config startup-config
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
Configuring the Basic Interface Parameters
Purpose
Enters configuration mode.
Enters the port-profile configuration mode
for the specified port profile.
Enables that port profile.
Exits the port-profile configuration mode.
(Optional) Displays the port-profile
configuration.
(Optional) Copies the running
configuration to the startup configuration.
2-47