Configuring The Debounce Timer - Cisco 7604-RSP720C-R Configuration Manual

Configuring the Basic Interface Parameters
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
DETAILED STEPS
Command
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
interface ethernet slot/port
Example:
switch(config)# interface ethernet 3/1
switch(config-if)#
Step 3
{mdix auto | no mdix}
Example:
switch(config-if)# mdix auto
switch(config-if)#
Step 4
show interface ethernet slot/port
Example:
switch(config)# show interface ethernet 3/1
switch(config-if)#
Step 5
exit
Example:
switch(config-if)# exit
switch(config)#
Step 6
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to enable MDIX for Ethernet port 3/1:
switch# configure terminal
switch(config)# interface ethernet 3/1
switch(config-if)# mdix auto
switch(config-if)#
This example shows how to disable MDIX for Ethernet port 3/1:
switch# configure terminal
switch(config)# interface ethernet 3/1
switch(config-if)# no mdix
switch(config-if)#

Configuring the Debounce Timer

You can enable the debounce timer for Ethernet ports by specifying a debounce time, in milliseconds
(ms), or disable the timer by specifying a debounce time of 0.
You can show the debounce times for all of the Ethernet ports by using the show interface debounce
command.
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
2-26
Chapter 2 Configuring Basic Interface Parameters
Purpose
Enters configuration mode.
Specifies an interface to configure, and
enters interface configuration mode.
Specifies whether to enable or disable
MDIX detection for the port.
Displays the interface status, which
includes the MDIX status.
Exits the interface mode.
(Optional) Copies the running
configuration to the startup
configuration.
OL-23435-03