Rom Monitor Syntax Conventions; Command Descriptions - Cisco 2611 - Router - EN User Manual

ROM Monitor Syntax Conventions

ROM Monitor Syntax Conventions
The ROM monitor syntax in this appendix uses the following conventions:
•
Square brackets [ ] denote an optional element. In the following example, the element
abc is not required, but you can specify it if you choose:
command [abc]
•
If a minus option is followed by a colon (for example, [-s:]) you must provide an
argument for the option.
•
A term in italics means that you must fill in the appropriate information. In the following
example, you replace the term in italics with the interface type you are using:
command type interface

Command Descriptions

This section lists some useful ROM monitor commands. Refer to the Cisco IOS
configuration guides and command references for more information on ROM monitor
commands.
•
boot or b—Boot an image.
— b boots the first image in Flash memory.
— b flash:[name] boots the Cisco IOS software from the Flash memory.
— b filename tftpserver boots from the specified file over the network from the
C-4 Cisco 2600 Series Hardware Installation Guide
specified Trivial File Transfer Protocol (TFTP) server. For example:
boot c2600-i-mz 172.15.19.11