Table of Contents
Advertisement
Quick Links
UG003232
XDP™ XDP710-002 EVB: MOSFET adapter boards
setup user guide
About this document
Scope and purpose
This document describes how to connect the MOSFET adapter board with the
XDP™ XDP710-002
Evaluation
Board (EVB).
Intended audience
This document is intended for test engineers who want to evaluate the performance of the XDP710-002 hot-
swap controller.
User guide
Please read the sections "Important notice" and "Warnings" at the end of this document
V 1.0
www.infineon.com
2024-07-09
Advertisement
Table of Contents
Related Manuals for Infineon XDP XDP710-002
Summary of Contents for Infineon XDP XDP710-002
-
Page 1: About This Document
Intended audience This document is intended for test engineers who want to evaluate the performance of the XDP710-002 hot- swap controller. User guide Please read the sections “Important notice” and “Warnings” at the end of this document V 1.0 www.infineon.com 2024-07-09... -
Page 2: Important Notice
Boards provided by Infineon Technologies. The design of the Evaluation Boards and Reference Boards has been tested by Infineon Technologies only as described in this document. The design is not qualified in terms of safety requirements, manufacturing and operation over the entire operating temperature range or lifetime. -
Page 3: Safety Precautions
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide Safety precautions Safety precautions Note: Please note the following warnings regarding the hazards associated with development systems. Table 1 Safety precautions Warning: The evaluation or reference board contains DC bus capacitors which take time to discharge after removal of the main supply. -
Page 4: Table Of Contents
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide Table of contents Table of contents About this document ........................1 Important notice ..........................2 Safety precautions .......................... 3 Table of contents ..........................4 Introduction .......................... 5 Hardware requirements ......................6 EVAL_XDP710_FET_BD MOSFET adapter board ................ -
Page 5: Introduction
Introduction Introduction Infineon’s XDP™ XDP7x0-002 family, which includes XDP700-002 and XDP710-002 are highly integrated, wide- input voltage system designed to monitor and protect devices. These systems are digitally configurable and use a power management bus (PMBus) communication interface to access their register map and configure all of their features. -
Page 6: Hardware Requirements
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide Hardware requirements Hardware requirements The MOSFET adapter board kit can be ordered online from the order code shown in Table Table 2 Ordering code Order code Eval board compatibility Components included Three MOSFET adapter boards without MOSFET EVAL_XDP710_FET_BD... -
Page 7: Eval_Xdp710_Fet_Bd Mosfet Adapter Board
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide EVAL_XDP710_FET_BD MOSFET adapter board EVAL_XDP710_FET_BD MOSFET adapter board The following sections describe the EVAL_XDP710_FET_BD MOSFET adapter board highlighting the specifications, schematics, layout, bill of materials (BOM), and different FET footprints that can be supported on this evaluation board. -
Page 8: Eval_Xdp710_Fet_Bd Pcb Layouts
PC board – – P100147 A (FAB) 0603 Murata Not used SMC-diode Littelfuse Not used SOD523 – Not used PG-TDSON-8 Infineon Not used PG-HSOF-8-1 Infineon Not used PG-TO263-7 Infineon Not used PG-HSOG-8-1 Infineon Not used PG-HDSOP-16 Infineon Not used 0603... -
Page 9: Different Fet Footprint Options
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide EVAL_XDP710_FET_BD MOSFET adapter board Item Qty Reference Value Footprint Manufacturer Part number designator SOCK2 CON2_SMD_AVX-10- 2091590021019 9159 J1, J2 SO-M5 SO-SMD-M5-FEMALE Würth 7466105R Different FET footprint options The FET footprint supports D2PAK, TOLL, and SS08 packages in the following positions: Figure 5 PAK and D PAK7 position (top side) -
Page 10: Connections Of The Mosfet Adapter Board To The Eval_Xdp710_V2 Evaluation Board
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide EVAL_XDP710_FET_BD MOSFET adapter board Figure 8 PG-TSON-8-3 position (bottom side) Connections of the MOSFET adapter board to the EVAL_XDP710_V2 Evaluation Board To connect the MOSFET adapter board with the EVAL_XDP710_V2 board, the following components are needed: MOSFET adapter board: Comes without the FET populated on it, suitable FET(s) can be populated •... - Page 11 XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide EVAL_XDP710_FET_BD MOSFET adapter board Figure 10 MOSFET adapter board connection with XDP710-002 Evaluation Board User guide V 1.0 2024-07-09...
-
Page 12: References
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide References References Infineon Technologies AG: XDP710-002 hot-swap controller datasheet; Available online Infineon Technologies AG: XDP710-002 Evaluation Board webpage; Available online Infineon Technologies AG: XDP™ XDP710-002 evaluation PCBA user guide; Available online User guide V 1.0 2024-07-09... -
Page 13: Revision History
XDP™ XDP710-002 EVB: MOSFET adaptor board setup user guide Revision history Revision history Document Date Description of changes revision V 1.0 2024-07-09 Initial release User guide V 1.0 2024-07-09... -
Page 14: Disclaimer
For information on the types in question please contact your nearest Published by Infineon Technologies office. Except as otherwise explicitly approved by Infineon Infineon Technologies AG Technologies in a written document signed by 81726 Munich, Germany authorized...
Need help?
Do you have a question about the XDP XDP710-002 and is the answer not in the manual?
Questions and answers