Routing; Static - TRENDnet TEW-311BRP User Manual

Wireless Router user's manual

Routing

This page enables you to set how the router forwards data.
The following functions are covered in this section:
•

Static

•
Dynamic
•
Routing Table
Static
This screen enables you to set parameters by which the router forwards data to its destination if your network
has a static IP address.
Network Address: Type the static IP address your network uses to access the Internet. Your ISP or network
administrator provides you with this information.
Network Mask: Type the network (subnet) mask for your network. If you do not type a value here, the network
mask defaults to 255.255.255.255. Your ISP or network administrator provides you with this information.
Gateway Address: Type the gateway address for your network. Your ISP or network administrator provides
you with this information.
Interface: Select which interface, WAN or LAN, you use to connect to the Internet.
Metric: Select which metric you want to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom of the page.
Update: Select one of the entries in the static IP address table at the bottom of the page and, after changing
parameters, click Update to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the page and click Delete to re-
move the entry.
New: Click New to clear the text boxes and add required information to create a new entry.
– 38 –