TRENDnet TEW-311BRP User Manual page 51

The IP filter profiles are listed in the table at the bottom of the page.
When selecting items in the table at the bottom, click
anywhere in the item. The line is selected, and the
fields automatically load the item's parameters, which
you can edit:
Note!
Enable: Click to enable or disable the IP address filter.
Range Start: Type the minimum address for the IP range. IP addresses falling between this value and the
Range End are not allowed to access the Internet.
Range End: Type the minimum address for the IP range. IP addresses falling between this value and the
Range Start are not allowed to access the Internet.
Add: Click to add the IP range to the table at the bottom of the screen.
Update: Click to update information for the range if you have selected a list item and have made changes.
Delete: Select a list item and click Delete to remove the item from the list.
Clear: Click Clear to erase all fields and enter new information.
Click anywhere in the line to select it.
– 43 –