TRENDnet TEW-311BRP User Manual page 78

Wireless Router user's manual
Type command, "ipconfig /renew" in the command prompt window and press Enter. This command releases
the current IP address and acquire it from the network, i.e. DHCP server, once more.
In this case, the IP address that we acquired is the same as previous one, 192.
168.0.23. However, it's often that the acquired IP address of the network adapter might would not be the same.
!Note: To renew IP under Windows 98 and Windows ME, you will have to go to the Start menu > Run > type
winipcfg and click "OK". The Windows IP Configuration Menu window would appear, where you first click "re-
lease" button to release the current IP address, followed by clicking of "Renew" to acquire a new IP address
from network.
If the above methods for IP renew fail, you will have to try and restart the computer, which will reinitializes the
network adapter settings during startup including renewing IP address. If you still have problems getting an IP
address after computer restarts, you will have to consult with your MIS in your office or call computer and net-
work technicians.
– 70 –