TRENDnet TEW-311BRP User Manual page 29

3. Right-click the appropriate LAN connection and click Properties to open the properties dialog for the
connection:
4. Check the box next to Internet Protocol (TCP/IP) and click Properties:
5. If you are going to use DHCP to IP assign settings, click the radio buttons next to "Obtain an IP address
automatically" and "Obtain DNS server address automatically and go to step 6.
If you want to assign a fixed IP address, follow these steps:
h. In the TCP/IP Properties dialog box, click the radio button next to Use the following IP address:
i. Enter an IP address in the IP field.
In the example shown, all IP addresses from 211.231.181.100 to 211.231.181.254 are available for
dynamic IP address assignment, while 211.231.181.2 to 211.231.181.99 are available as static IP
addresses.
j. Type a Subnet Mask value for the router.
k. Type the router's IP address in the "Default gateway" field.
l. Check the radio button next to "Use the following DNS server addresses" and type the ISP/BSP do-
main name server IP address.
An ISP (Internet Service Provider) or BSP (Broadband
Service Provider) is an organization that provides us-
Note!
ers with Internet access via modem or cable/DSL
modem.
m. Click OK. You are returned to the Network configuration dialog box.
n. Click OK to apply the settings and exit the Network configuration dialog box.
– 21 –