TRENDnet TEW-311BRP User Manual page 77

Checking IP Address of Your Computer In Windows XP
Sometimes you will need to know the IP address of the computer that you are using. For example, when you
want to make sure that your computer is in the same network domain as that of your Access Point for you can
configure and access the AP.
Go to Start menu
> Run > type
"command"
Click "OK"
When the command prompt window appears, type command "ipconfig /all" and press Enter. This command will
display the IP addresses of all the network adapters in your computer.
In this case, the IP address of your network adapter is 192.168.0.23, which means your Access Point must
have an IP address of 192.168.0.xxx in order for you to be able to access it.
If the IP address is assigned by DHCP server on the network, there are chances you might have to release the
IP and acquire it from DHCP server again. Here is how you do it.
Go to Start menu
> Run > type
"command"
Click "OK"
– 69 –