Wan - TRENDnet TEW-311BRP User Manual

WAN

This screen enables you to set up the router WAN connection, specify the IP address for the WAN, add DNS
numbers, enter the MAC address, and set the MTU.
Connection Type: Select the connection type, either DHCP client/Fixed IP or PPPoE from the drop-down list.
When using DHCP client/Fixed IP, enter the following information in the fields (some information is provided by
your ISP):
WAN IP: Select whether you want to specify an IP address manually, or want DHCP to obtain an IP address
automatically. When Specify IP is selected, type the IP address, subnet mask, and default gateway in the
text boxes. Your ISP will provide you with this information.
DNS 1/2/3: Type up to three DNS numbers in the text boxes. Your ISP will provide you with this information.
MAC Address: If required by your ISP, type the MAC address of the router WAN interface in this field.
MTU: Type the MTU value in the text box.
When using PPPoE, enter the following information in the fields (some information is provided by your ISP):
– 27 –