The Order Of Effects; Creating, Renaming & Deleting Categories Or Presets - E-Mu 1212M Owner's Manual

The Order of Effects

PatchMix DSP allows you to record your tracks without effects (dry) and monitor with
effects enabled (wet). It works like this: If the effect is inserted BEFORE the ASIO send in
the signal path, it will get recorded; if the effect is inserted AFTER the ASIO send, it will
not be recorded.
Recording dry allows you to
hear your performance with
effect (to get the proper feel),
but gives you the flexibility to
add or modify effects later
during mixdown. This way if
you don't like the way the
effect sounds, you can change
or modify the effect without
having to perform the part
again.
Creating, Renaming & Deleting Categories or Presets
There are several utilities to help you organize your effects presets.
To Create a New Preset Category
You can create your own category folders to help organize your effects presets.
Left-click on the New Folder icon at the top of the Effects Palette. A pop-up dialog
1.
box appears asking you to "Enter the Name of the New Category."
• Alternatively, you can Right-click over an Effects Folder, which calls a pop-up
dialog box with the option to "Create New Category."
Type in a name for your new folder.
2.
Click OK to create a new folder or Cancel to cancel the operation.
3.
To Delete an Effect Category or Preset
Right-click on the category folder you wish to delete. A pop-up selection box
1.
appears.
Select "Delete Category". A popup dialog box appears warning you that this action
2.
will delete all presets in the folder.
Click OK to delete the folder or Cancel to cancel the operation.
3.
To Rename an Effects Category
Right-click on the category folder you wish to rename. A pop-up selection box
1.
appears.
Select "Rename Category". A pop-up dialog box appears, asking you to "Enter New
2.
Category Name."
Click OK to rename the folder or Cancel to cancel the operation.
3.
E-MU Digital Audio System
Input
If you want Effects
1L/1R
to be recorded
insert them Above
the ASIO Send.
ASIO
To ASIO
Send
Panning
Fader
Aux 1 Bus
Main Output Bus
To monitor Effects,
but not record them,
insert them Below
the ASIO Send or
in a Sidechain.
Send Return
Amount Amount
Reverb
Output
To Monitor Speakers
5 - Effects
The Effects Palette
57