E-Mu 1212M Owner's Manual page 34

4 - The PatchMix DSP Mixer
The Session
• Inputs +4 or -10
• Outputs +4 or -10
• PCI Card Optical Input
• PCI Card Optical Output
• S/PDIF Optical Format
34
Selects between Consumer level (-10dBV) or
Professional level (+4dBu) inputs.
(Use the -10dBV setting if your input is too weak.)
Selects between Consumer level (-10dBV) or
Professional level (+4dBu) outputs.
(The +4 dBu setting outputs a hotter level.)
Selects between ADAT or optical S/PDIF for the 1010
PCI card ADAT Input. The coaxial S/PDIF input is
disabled when S/PDIF optical is selected.
Selects between ADAT or optical S/PDIF for the 1010
PCI card ADAT Output. The coaxial S/PDIF Output is
disabled when S/PDIF optical is selected.
Selects between S/PDIF or AES/EBU format for S/PDIF .
This sets the S/PDIF-AES status bit, but does not affect
the signal level.
Creative Professional