E-Mu 1212M Owner's Manual page 129

Specifications: 1820M System
TURNTABLE INPUT
Frequency Response:
THD+N:
SNR:
Stereo Crosstalk:
Maximum Level:
Input Capacitance:
Input Impedance:
DIGITAL I/O
S/PDIF
ADAT
Firewire
MIDI
SYNCHRONIZATION
Internal Crystal Sync:
RMS JITTER @ 44.1K
(Measured via Audio Precision 2)
SMPTE
Frame Rates
Modes
Input Level:
Output Level:
Input Impedance:
E-MU 1820M/1820/1212M PCI Digital Audio System
RIAA equalized phono input
+/-0.5 dB, 50 Hz - 20 kHz
-76 dB (.015%) (1 kHz, 10 mV RMS unbalanced input)
90 dB (1kHz, 10 mV RMS unbalanced input)
< -80 dB (1kHz at -1 dBFS)
Professional: 80 mV RMS
Consumer: 20 mV RMS
220 pF
47K ohm
• 2 in/2 out coaxial (transformer coupled)
• 2 in/3 out optical (software switchable with ADAT)
• AES/EBU or S/PDIF (switchable under software control)
• 8 channels, 24-bit @ 44.1/48 kHz
• 4 channels, 24-bit @ 96 kHz
• 2 channels, 24-bit @ 192 kHz
400 IEEE 1394a port (6-pin)
Compatible with DV cameras or HDs
2 MIDI in, 2 MIDI out
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
ADAT, S/PDIF (optical or coaxial)
Word Clock (sync card only) - (75 ohm termination, switchable)
SRSync SourceRMS jitter in picoseconds
44.1 kHz internal Crystal 596ps
44.1 kHz Optical Input 795ps
Converts to/from longitudinal time code (LTC) to MIDI time
code (MTC)
24, 25, 30 drop, 30 non-drop frames/second.
Compatible with 29.97 fps timecode
Regeneration, stripe and conversion modes
0.5 - 4V p-p
+4 dBu, -10 dBV (software selectable)
10K ohm
7 - Appendix
Technical Specifications
129