E-Mu 1820 System At 176.4Khz Or 192Khz (1010 Pci Card & Audiodock); E-Mu 1212 System At 176.4K/192K (1010 Pci Card & I/O Card) - E-Mu 1212M Owner's Manual

E-MU 1820 System at 176.4kHz or 192kHz
(1010 PCI Card & AudioDock)
At the highest sample rate you have 4 inputs and 10 output channels.
There are four possible input configurations when using the E-MU 1820 system at
176.4kHz or 192kHz. Each of the three options provides four input channels.
• Microphone Input and Line 2 Input enabled
• Microphone Input and ADAT Input enabled (2-chan ADAT)
• Line 1 Input and ADAT Input enabled (2-chan ADAT)
• Line Inputs 1 & 3 enabled (allows use of turntable inputs at 192kHz)
S/PDIF is not specified to operate at 176.4kHz/192kHz and so all S/PDIF inputs and
outputs are disabled. The headphone output parallels the Monitor output and is no
longer independently assignable, just like at 96kHz.
E-MU 1820 Inputs/Outputs at 176.4kHz or 192kHz
Source
ADAT 0
Microphone 2
Line 1 0
Line 2 0
Line 3 2
Line 4 out (monitor) -
S/PDIF 1 0
S/PDIF 2 0
Headphone out -
4
Total
E-MU 1212 System at 176.4k/192k (1010 PCI Card & I/O Card)
At 176.4kHz or 192kHz, you have two 24-bit inputs and outputs. S/PDIF is not
specified to operate at these rates and so all S/PDIF inputs and outputs are disabled. The
ADAT input/output channels are reduced to two channels (S/MUX standard).
E-MU 1212M Inputs/Outputs at 176.4kHz/192kHz
Source Inputs
ADAT 2
S/PDIF 1 0
Line 2
4
Total
E-MU 1820M/1820/1212M PCI Digital Audio System
Inputs Inputs
Mic & Mic
Line 3 & ADAT
2 2
2 0
0 2
0 0
0 0
- -
0 0
0 0
- -
4 4
Outputs
2
0
2
4
Inputs
Inputs
Line 1
Line 1 & 3
& ADAT
0
0
2
0
2
-
0
0
-
4
6 - Using High Sample Rates
Total
Outputs
2
-
2
2
0
2
0
0
2 (monitor)
10
Overview
113