Appendix; Sync Daughter Card Supplement; Smpte Conversion; Smpte Features - E-Mu 1212M Owner's Manual

7 - Appendix

Sync Daughter Card Supplement

SMPTE Conversion

One of the main functions of the Sync Daughter Card is to convert SMPTE (LTC) to
MIDI Time Code (MTC) and vice-versa. The term "Host MTC" refers to MTC, which is
generated or used by the host application (Cubase, etc.). MTC is also available at the
MIDI jack on the back of the Sync Card.

SMPTE Features

• Conversion of SMPTE to MTC quarter-frame messages & full-frame messages.
Constant quarter-frame messages are generated with steady SMPTE data input.
Occasional MIDI full-frame messages are generated when SMPTE contains data dropouts.
• Conversion of MTC (quarter frame & full frame) messages from the host
computer to SMPTE out.
Simultaneous SMPTE and MTC output when receiving MTC from the host computer
• Outputs SMPTE and MTC striping data.
SMPTE Start Time and type can be set via System Settings dialog box.

SMPTE Options

When the Sync Daughter Card is installed in your system a SMPTE button in the
PatchMix DSP mixer becomes visible. Pressing the SMPTE button brings up the SMPTE
window.
Start Striping
Current Time
SMPTE Status/
Error Indicators
E-MU 1820M/1820/1212M PCI Digital Audio System
SMPTE
Flywheel Mode
Start Time • Off
• Fixed
SMPTE Frame Stop
Rate Settings Striping
• Continuous Flywheel
•1-time Jam
Amount
Output Word Clock
Source Termination
Sync Daughter Card Supplement
Warning: SMPTE and
MTC do not provide
sample sync for digital
I/O. You must use Word
Clock, S/PDIF or ADAT
sync.
Output
Level
7 - Appendix
117