Grouping Tracks - E-Mu 1212M Owner's Manual

In practical use, however, you'll probably never need to use more than one E-Wire VST
on a single track since PowerFX effects can be placed in series. We have included this
feature "just in case" you need it.
Here's one more example of how to use the E-Delay Compensator with different
numbers of PowerFX/E-Wire sends on each track. The delay compensation on each track
must equal the track with the maximum number of PowerFX/E-Wire sends. See the
diagram below.
Cubase VST or Cubasis
Track 1
PowerFX PowerFX
or E-Wire or E-Wire
PatchMix
Since track 1 uses two PowerFX/E-Wire inserts, the delay of all the other tracks must
equal two. Track 2 has one PowerFX/E-Wire insert and so adding one unit of E-Delay
keeps it time aligned. Track 3 doesn't use a PowerFX/E-Wire insert and so it needs two
E-Delay Units to remain in alignment.

Grouping Tracks

When several tracks require E-Delay Compensation, you can send the output of each
track to a group or bus and use a single E-Delay Compensator on the output of the
group or bus.
• E-MU Digital Audio System and PatchMix DSP must be installed.
• E-Wire is compatible with Cubase SX/SL/LE, Cubase VST, Wavelab, and Cakewalk
Sonar (via DirectX-VST adapter) among others.
E-MU Digital Audio System
Track 2
PowerFX
or E-Wire
DSP
Track 3
E-Delay E-Delay
1 2
5 - Effects
E-MU E-Wire VST
109