Tv Screen & Selectors; Effect - E-Mu 1212M Owner's Manual

4 - The PatchMix DSP Mixer
Main Section
TV Screen & Selectors
The "TV screen" at the top of the main section is a multi-function display and control
center for the input and output routings and effect controls. The three buttons at the top
of the display select the current function of the display—Effect, Inputs or Outputs.

Effect

Select the Effect display view in the main section, then click on an Effect Insert to
display the effect parameters. If an insert effect is not selected, the display will read "No
Insert".
Most effects have a wet/dry mix parameter to control the ratio of effect to plain signal.
The wet/dry setting is stored with the effect preset. The parameter set varies with the type
of effect. See "List of Core Effects"
Effect Display
View Button
Wet/Dry Mix Control
When a Send or a Send/Return insert is selected with the effects display enabled, the TV
screen shows you where the Send is going and where the Return is coming from. The
bypass or solo buttons at the top of the display are available for Send/Return type inserts
only.
50
for detailed information about the individual effects.
Effect Location
Effect Bypass &
Solo Buttons
Effect Parameters
User Preset Section
Send Destination
Return Source
Note: Effects have to
E
be placed into an insert
location before you can
program them.
Creative Professional