Receiver Back Panel; Tv1 Connections - Dish Network 322 User Manual

Chapter 2
Receiver Description and Installation

Receiver Back Panel

Tip: The six coaxial
connections on the
back of your
receiver are color
coded to make the
connectors easy to
identify. Inside the
front cover of this
guide are stickers
that are color
coded the same
way as the coaxial
connections. See
the installation
instructions
starting on page 19
for information on
how to use the
stickers that go on
the coaxial cables.
Page 14
The receiver connections on the back panel are placed in three groups:
• - Use these connections with the nearby TV.

TV1 Connections

• - Use these connections with the remote TV(s).
TV2 Connections
•
Other Connections
antenna, and phone line.
TV1 Connections
The following connections provide TV1 menus and programming to the
nearby TV.
TV CH 3-4 OUT
The connection provides good quality video
CH 3-4 OUT
and mono (non-stereo) audio to your nearby TV. Use a
coaxial cable to make the connection. The
connection is color coded white.
RCA Out
The audio/video outputs provide high quality
RCA
picture and stereo sound to the nearby TV (if your
TV has these connections). Use an RCA-type cable
assembly to make the connection. If the TV has
only one input for this type of audio, connect it to
the right (R) phono (RCA) audio output on the
receiver.
- Use these connections with the dish antenna, UHF
CH 3–4 OUT