Sage Oracle Jet SES985 Safety Manual page 3

recommended to provide
additional safety when using
all electrical appliances.
Safety switches with a rated
operating current not more
than 30mA are recommended.
Consult an electrician for
professional advice.
• Regularly inspect the power
cord, plug and actual appliance
for any damage. If found to
be damaged in any way,
immediately cease use of
the appliance and return the
entire appliance to the nearest
authorised Sage Service
Centre for examination,
replacement or repair.
• Do not let the power cord hang
over the edge of a counter
or table. Do not let the power
cord touch hot surfaces
or become knotted.
• To eliminate a choking hazard
for young children, discard
the protective cover fitted
to the power plug safely.
• Position the appliance on
a stable, heat resistant, level,
dry surface away from the
counter edge, and do not
operate on or near a heat
source such as a hot
plate, ovenor gas hob.
• Do not operate the appliance
in an enclosed space, or inside
a cupboard.
• Do not use attachments
other than those provided
with the appliances. The use
of attachments not sold or
recommended by Sage may
cause fire, electric shock
or injury.
• This appliance is for household
use only. Do not use the
appliance for anything other
than its intended purpose.
Do not use in moving vehicles
or boats. Do not use outdoors.
Misuse may cause injury.
• Do not touch hot surfaces.
Always ensure the appliance
has been allowed to cool;
if the appliance is to be:
- Left unattended, cleaned,
changed accessories,
moved, assembled or
stored, always switch off
the espresso machine by
pressing the POWER button
to OFF. Switch off and unplug
from the power outlet.
• Improper use of the appliance
incorrectly operated or
unprofessionally repaired. In
such a case, any warranty
claim is void. No warranty for
any damages can be accepted.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote-control system.
• Use caution when operating
machine as metal surfaces
are liable to get hot during
use. Heating element surface is
subject to residual heat after use.
EN
3