Specifications; Safety Instructions; Location Of Controls; Operating Instructions - GBC CombBind CB25 Pro Operating Instructions Manual

EN
Instruction Manual

Specifications

Operation Mode
Max. Punch Capacity per lift (70 gsm)
Max. Punch Capacity (PVC Covers)
Max. Approx. Binding Capacity (70 gsm)
Paper Formats
Max. Binding Element
De-Selector Pins
Margin Depth Selector
Machine Dimensions (H x W x D)
Weight (kg)
Voltage
Please read and keep these
important safety instructions
For a full copy of the operating instructions, hints
& tips and troubleshooting guide, please visit
www.gbceurope.com
Warning: Moving Parts hazard, keep hands away
from moving parts.

Safety instructions

m
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS
IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT
ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
• In order to avoid overloading your machine, please refer
to the maximum punch guide located on the front of your
machine before punching.
• When punching PVC/PP covers, we recommend the
cover be punched with some paper either side.
• DO NOT punch metallic objects such as staples or paper
clips.
• Please empty the waste tray regularly.
• Ensure that the machine is operated on a flat stable
surface.
• Never lift the machine by the punching handle. Always
use the hand grips located on the side of the machine.
• To avoid risk of injury DO NOT put your fingers into the
wire binding channel.
• The binder is not to be exposed to temperature / humidity
conditions that would cause condensation. Maximum
ambient temperature: 40ºC
• This equipment is not suitable for use in locations where
children are likely to be present.
• Use the device in a suitable, properly installed and easily
accessible mains power socket. Locate near the outlet
and do not use extension cords. Make sure the device
can be disconnected from the mains at all times.
4
GBC CombBind CB25 Pro
Manual
25 sheets
2 (0.2mm)
500 sheets
A4, A5, US Letter
51mm
Full 21 disengageable
3
252 x 390 x 352mm
14.5
-

Location of controls

1 Punching Handle (CB25 Pro only)
2 Comb Opening Handle
3 Comb Opening Teeth
4 De-selectable punching pins
5 Punching Slot
6 Paper Edge Guide
7 Clippings Drawer
8 Margin Adjuster
9 On/Off Switch
J Foot Pedal (CB25E Pro only)
Safety tips - CB25E Pro
m
• DO NOT obstruct air inlets and outlets.
• DO NOT use the binder if the power cord (mains cable)
is damaged.
• DO NOT place the power cord where it may be tripped
over or pulled. Ensure it does not come into contact with
hot surfaces such as pipes or radiators. Make sure the
cable is not squashed or pinched.
• DO NOT use an extension cable unless it is absolutely
necessary and then only use one of a suitable current
rating (10A or greater).
• DO NOT leave the binder connected to the electricity
supply when not in use.
• DO NOT immerse the binder in water or other liquids.
Doing so will result in ELECTRIC SHOCK.
• DO NOT attempt to disassemble the binder. Always
consult a qualified person.
• The noise emitted by the machine does not exceed 70dB.
GBC CombBind CB25E Pro
Electric
25 sheets
2 (0.2mm)
500 sheets
A4, A5, US Letter
51mm
Full 21 disengageable
3
252 x 390x 352mm
18.5
220-240V~ 50/60Hz 2A