Switching Zones; Switching The Multi-Zone Input Source To The Same Input Source As Used In The Main Zone; Setting The Zone For Which The Sub Remote Control Unit Is Used (Zone Select Lock Mode); Setting The Remote - Denon AVR-3310CI Owner's Manual

Switching Zones

Use this procedure to select the zone to be operated by the sub
remote control unit.
1
Press [ZONE SELECT] .
The currently selected multi-zone indicator lights.
2
While the multi-zone indicator is light, press
SELECT]
to select the zone to be operated.
The currently selected multi-zone indicator lights.
Switching the Multi-zone Input Source
to the Same Input Source as Used in the
MAIN ZONE
This function is convenient for example when you want to listen to the
same song as the one playing in the MAIN ZONE while in a different
zone.
1
[ZONE SELECT]
Press and set to ZONE2 or ZONE3.
The currently selected multi-zone indicator lights.
2
Press [M.ZONE CALL] on the sub remote control unit.
The multi-zone input source switches to the MAIN ZONE's
input source.
NOTE
• This cannot be used for the MAIN ZONE or ZONE4.
[M.ZONE CALL]
• When is pressed while the multi-zone power is off,
the multi-zone power turns on and the input source switches to the
MAIN ZONE's input source.
Setting the Zone for Which the Sub
Remote Control Unit is Used
(ZONE SELECT LOCK Mode)
We recommend always using the sub remote control unit for the
same room. When this is done, the unit can be set so that the zone
does not switch when buttons are operated.
[ZONE
1
Use the tip of a pen to press
All the multi-zone indicators light.
2
Select the multi-zone to be set.
The selected multi-zone indicator lights.
q To set to "MAIN ZONE" : Press
w To set to "ZONE2" : Press
e To set to "ZONE3" : Press
r To set to "ZONE4" : Press
3
Use the tip of a pen to press
The multi-zone indicator turns off.
To Cancel
1
Use the tip of a pen to press
The currently selected multi-zone indicator lights.
2
Press [ZONE SELECT] .
All the multi-zone indicators light.
3
Use the tip of a pen to press
The multi-zone indicator turns off.
Setting the Remote ID
When using multiple DENON AV receivers in the same room, make this
setting so that no AV receiver other than the desired one operates.
1
While pressing
with the tip of a pen.
The multi-zone indicator corresponding to the currently selected
remote ID flashes.
[ADVANCED SETUP] .
2
Select the remote ID to be set.
q To set to 1 : Press
The "M" indicator flashes.
[REPEAT] w To set to 2 : Press
.
[RANDOM] The "Z2" indicator flashes.
.
e To set to 3 : Press
[USB]
.
[ALL MUSIC/FAVORITES] The "Z3" indicator flashes.
.
r To set to 4 : Press
[ADVANCED SETUP] .
The "Z4" indicator flashes.
3
While pressing
with the tip of a pen.
The multi-zone indicator turns off.
NOTE
[ADVANCED SETUP] .
When changing a setting, be sure to set the same remote ID as the
AVR-3310CI's (vpage 43).

Resetting the Settings

[ADVANCED SETUP]
.
While pressing
with the tip of a pen.
All the multi-zone indicators flash 4 times, then all the settings are
restored to their defaults.
Operating the Sub Remote Control Unit
[MENU] , press [ADVANCED SETUP]
[REPEAT]
.
[RANDOM]
.
[USB]
.
[ALL MUSIC/FAVORITES]
.
[MENU] , press [ADVANCED SETUP]
[ZONE OFF] [ADVANCED SETUP]
, press