Download
Share
Print this page
Denon POA-A1HDCI Command List
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Amplifier
  5. POA-A1HDCI
  6. Command list
Denon POA-A1HDCI Command List

Denon POA-A1HDCI Command List

Serial protocol
Hide thumbs Also See for POA-A1HDCI:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: Owner's Manual
DENON POA-A1HD control protocol
Application model : POA-A1HD
Application terminal: RS-232C
Connector specification
Ⅰ. RS-232C
Connector type: DB-9pin female type, slave straight connection (DCE type)
( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC )
Communication format:
Synchronous system
Communication system
Communication speed
Character length
Parity control
Start bit
Stop bit
Communication procedure
Communication data length
: Tone step synchronization
: A half duplex
: 9600bps
: 8 bits
: None
: 1 bit
: 1 bit
: Non procedural
: 135 bytes (maximum)
- 1 -
Ver. 1.0.7

Advertisement

loading
Need help?

Need help?

Do you have a question about the POA-A1HDCI and is the answer not in the manual?

Questions and answers

Related Manuals for Denon POA-A1HDCI

Summary of Contents for Denon POA-A1HDCI

  • Page 1 Connector specification Ⅰ. RS-232C Connector type: DB-9pin female type, slave straight connection (DCE type) ( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC ) Communication format: Synchronous system : Tone step synchronization...
  • Page 2 : The command by ASCII CODE, parameter expression *ASCII CODE which can be used is from 0x20 to 0x7F: the alphabet and the number of 0-9, and space (0x20), some signs, AND carriage return (0x0D) --- It is used only as a pause sign.
  • Page 3 COMMAND and PARAMETER list COMMAND PARAMETER function Example PWON POA POWER ON/STANDBY change PAPWON<CR> PWSTBY PAPWSTBY<CR> PAPW?<CR> Return PW Status INL1OFF Input Channel L* Setting PAINL1OFF<CR> PAINL1RCA<CR> INL1RCA INL1XLR PAINL1XLR<CR> PAINL2OFF<CR> INL2OFF INL2RCA PAINL2RCA<CR> PAINL2XLR<CR> INL2XLR INL3OFF PAINL3OFF<CR> INL3RCA PAINL3RCA<CR>...
  • Page 4 R1/R2 Power Amp setting PAAMPR12BAP<CR> AMPR12BAP PAAMPR12BTL<CR> AMPR12BTL AMPR34NRM R3/R4 Power Amp setting PAAMPR34NRM<CR> AMPR34BAP PAAMPR34BAP<CR> PAAMPR34BTL<CR> AMPR34BTL PAAMP?<CR> AMP? Return Power Amp setting PAAMPL12?<CR> AMPL12? Return * Power Amp setting AMPL34? PAAMPL34?<CR> AMPLR5? PAAMPLR5?<CR> AMPR12? PAAMPR12?<CR> PAAMPR34?<CR> AMPR34? - 4 -...
  • Page 5 ：RESPONSE becomes the following order. State of input channel L1 –＞State of L2 -> State of L3 -> State of L4 -> State of L5 -> State of R5 -> State of R4 -> State of R3 -> State of R2 -> State of R1 PAINL1xxx<CR>...
  • Page 6 PAMTxxx<CR> (xxx ; "ON" or "OFF") Return Left Meter setting PAMTLx<CR> (x ; "1"～"4" or "NONE") Return Center Meter setting PAMTxx<CR> (xx ; "L5" or "R5" or "CNONE") Return Right Meter setting PAMTRx<CR> (x ; "1"～"4" or "NONE") - 6 -...
  • Page 7 EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example PWON POA POWER ON/STANDBY change PAPWON<CR> PWSTBY POA Standby status PAPWSTBY<CR> PAPW?<CR> PWPROTECT POA Protection status INL1OFF Input Channel L* Information PAINL1OFF<CR> PAINL1RCA<CR> INL1RCA INL1XLR PAINL1XLR<CR> PAINL2OFF<CR> INL2OFF INL2RCA PAINL2RCA<CR> PAINL2XLR<CR>...
  • Page 8 EVENT PARAMETER function example AMPL12NRM L1/L2 Power Amp Information PAAMPL12NRM<CR> AMPL12BAP PAAMPL12BAP<CR> AMPL12BTL PAAMPL12BTL<CR> AMPL34NRM L3/L4 Power Amp Information PAAMPL34NRM<CR> AMPL34BAP PAAMPL34BAP<CR> AMPL34BTL PAAMPL34BTL<CR> AMPLR5NRM L5/R5 Power Amp Information PAAMPLR5NRM<CR> AMPLR5BAP PAAMPLR5BAP<CR> AMPLR5BTL PAAMPLR5BTL<CR> AMPR12NRM R1/R2 Power Amp Information PAAMPR12NRM<CR>...

This manual is also suitable for:

Poa-a1hd