S0 Add New Feature; Language - Denon AVP-A1HD Owner's Manual

S0 Add New Feature
Display the new functions which can be purchased for downloading
to the AVP-A1HDCI and upgrade.
When you purchase a new function and register your user information,
"Registerd" is displayed on this menu and you can proceed with the
upgrade.
Upon completion of the upgrade, you can start using the new
function.
When "Not Registered" is displayed on the Add New Feature screen,
you cannot upgrade.
To use the upgrade function, you should purchase an upgrade package
from the DENON website.
To purchase the package, you will need the ID number shown on this
screen.
To display the ID number on the screen, hold the
buttons on the main unit down for 3 seconds or more.
Upgrade
Execute the upgrade process.
When upgrading starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of upgrade time which has elapsed is displayed during
the upgrade process.
When upgrading is complete the power indicator becomes green and
normal status is resumed.
b If the upgrade is not successful, an error message identical to those
in "Firmware Update" will appear on the display.
Upgrade Status
A list of the additional functions provided by the Upgrade will be
displayed.
Notes concerning use of "Firmware Update" and
"Add New Feature"
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection. For
details, see pages 35 ~ 38.
• Do not turn off the power until updating or upgrating is completed.
• Normally there is no need to use this function, aside from the cases
described below.
⋅ Firmware Update : In the case of applying the latest firmware
updates (free)
⋅ Add New Feature : In the case of future upgrades to add new
functions to the receiver (payment required)
⋅ Information regarding the "Firmware Update" function and "Add
New Feature" will be announced on the DENON web site each
time related plans are defined.
• Even with a broadband connection to the Internet, approximately
1 hour is required for the updating/upgrading procedure to be
completed.
STATUS
p and
Once updating/upgrading starts, normal operations on the
AVP-A1HDCI cannot be performed until updating/upgrading is
completed.
Furthermore, updating/upgrading the firmware may reset the
backup data for the parameters, etc., set for the AVP-A1HDCI.
• When updating/upgrading the firmware, we recommend using
wired connections (Ethernet cable).

Language

Select the language displayed on the GUI screen.
F Menu tree F
Manual Setup
Language
[Selectable items] English Français
Operating from the main unit
b The GUI menu is not displayed when performing this setting.
AUDIO DELAY RETURN
q Press and hold the and
3 seconds.
"Video Format" appears on the display.
ui
w Use the button to set "GUI Language".
e Use the o p button to make the setting.
ENTER MENU RETURN
r Press the , or button to complete the
setting.
buttons for at least