Input Att; A0 Playback Mode (Ipod); A1 Assign - Denon AVP-A1HD Owner's Manual

l Input Att.
Set when replay sound is distorted because the input level is too
large.
[Selectable items] OFF –6dB
"Input Att." is effective during DSP processing of analog audio
signals.
A0 Playback Mode (iPod)
Make settings for iPod playback.
Repeat
Make settings for repeat mode.
[Input source]
CD DVD HDP TV/CBL SAT VCR
V.AUX
[Selectable items] All One OFF
Shuffle
Make settings for shuffle mode.
[Input source]
CD DVD HDP TV/CBL SAT VCR
V.AUX
[Selectable items] Songs Albums OFF
This can be selected for input sources for which "Assign" is assigned
at the "iPod dock" setting.
A1 Assign
Assign input sources to input connectors.
HDMI
Select HDMI connector to assign to this source.
[Input source]
DVD HDP TV/CBL
[Selectable items]
Input source
Default setting
Input source
Default setting
• With an HDMI connection, video and audio signals are transmitted
DVR-1 DVR-2
simultaneously. To play the video signal assigned at "HDMI"
combined with the audio signal assigned at "Digital", select "Digital"
at the GUI menu "Source Select" – "Input Mode" (vpage 47).
• When the AVP-A1HDCI and monitor are connected with an HDMI
cable, if the monitor is not compatible with HDMI audio signal
playback, only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
NOTE
This cannot be set for input sources for which "iPod dock" is assigned.
DVR-1 DVR-2
SAT VCR DVR-1 DVR-2 V.AUX
1 2 3 4 5 6 None
DVD HDP TV/CBL SAT
HDMI1 HDMI2 None HDMI3
VCR DVR-1 DVR-2 V.AUX
HDMI4 HDMI5 HDMI6 None
Digital
Select digital input connector to assign to this source.
[Input source]
CD DVD HDP TV/CBL SAT VCR
V.AUX
[Selectable items]
Coaxial1 ~ 4 Optical1 ~ 5 DENON LINK
z: When a DENON DVD player and the DENON LINK have been
connected, be sure to make a setting to "DENON LINK".
Input source CD DVD HDP
Default setting Coaxial 4 Coaxial 1 Coaxial 2 Optical 1 Coaxial 3
Input source VCR DVR-1 DVR-2
Default setting Optical 4 Optical 2 Optical 3 Optical 5
NOTE
This cannot be set for input sources for which "iPod dock" is assigned.
Component
Select component video input to assign to this source.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1
[Selectable items] 1 ~ 5 – RCA 6 – BNC
Input source DVD HDP
Default setting 1-RCA 2-RCA
Input source VCR DVR-1
Default setting None 5-RCA
NOTE
This cannot be set for input sources for which "iPod dock" is assigned.
DVR-1 DVR-2
z
BNC1/2 None
TV/CBL SAT
V.AUX
DVR-2 V.AUX
None
TV/CBL SAT
3-RCA 4-RCA
DVR-2 V.AUX
None None