Memory Status; Factory Setting Reset; Units - Extech Instruments VPC260 User Manual

6
System Settings Menu

6.2.8 Memory Status

Check the number of records stored in memory.
1. Scroll to the Memory Status selection in the menu.
2. Press ENTER to open the status page.
3. The status page shows the number of records stored. Up to 1,000 records
can be stored.
4. Press ESC to return to the menu.

6.2.9 Factory Setting Reset

Restore the meter's default settings.
1. Scroll to the Factory Setting selection in the menu.
2. Press ENTER to open the selection.
3. Scroll to YES to reset the meter. Scroll to NO to leave the meter
unchanged.
4. Press ESC to execute the action and to return to the menu.

6.2.10 Units

Select the unit of measure (℃ or ℉) for temperature displays.
1. Scroll to the Unit selection in the menu.
2. Press ENTER to open the selection.
3. Use the arrows to highlight the desired unit.
4. Press ESC to save the setting.
#NAS100084; r. AA/93064/93076; en-GB
19